Auto indexing shellplate
One set of dies
Built in primer pocket swager
Automatic powder measure system
Automatic priming system
This is a commercial grade machine, is capable of loading 1,000 to 1,200 rounds per hour and carries a one year warranty.
Machine pictured shows available options. These are not included with the base machine. Click "Options" folder to review the available options for this machine.
Instructional DVD (Stock#19485)
Powder check die(Stock#21044) - a sensor that goes down into each case to monitor the level of powder in it. In the event of a significant error in powder charge, either high or low, it sounds an audible alarm.
Bullet Tray(Stock#22215)-a replacement for the standard plastic bullet bin, the aluminum bullet tray elevates the bullets to the level of the shellplate for easier reach.
Low powder alarm(Stock#16306) - warns you both audibly and visibly when powder level in the measure gets low.
To change calibers, you will need:
Caliber conversion kit
If you want to leave your dies preset, you'll need: Toolhead and a Powder die OR The 1050 Quick Change, which includes a powder measure, powder die, and a toolhead . This allows you to leave your dies and powder charge set up and dedicated to a specific cartridge for faster, easier caliber changes.
You may need a different casefeed plate. Please refer to the caliber conversion chart in the Instruction Manual.
If changing primer sizes, you will need the appropriate primer system conversion (#20476-Small, #20419-large)
I suggest that you also get - Dillon dies designed for high speed use Extra primer pick-up tubes, if loading more than 100 - 200 rounds per sitting. If you are loading more than 500 rounds per reloading session, then the RF-100 Electric Primer Filler is an accessory well worth considering. Machine cover to keep it dust free You will also need (at minimum):
Primer flip tray
Case lube(for bottleneck cartridges)