CZ 75 SP01 ACCU SHADOW (CZC Custom Pistol)

USPSA Production Approved!

Features

CZC Stainless steel barrel bushing.
CZC Stainless steel reverse plug.
CZC SHORT reset trigger system “CZC SRTS”
CZC fully adjustable rear sight.

These modifications have been added to the already customized CZ Custom SP01 Shadow Pistol. #91029

We have been very busy at the CZ Custom Shop over the last few months. We have been working and perfecting some new products and parts for the SP01 Shadow and the CZ 75 Shadow. This details the changes brought about to create the CZ 75 SP01 ACCU SHADOW.

Let’s talk about the difference

The new barrel bushing is 1/4 turned into the slide similar to a 1911. The bushing is fitted to the barrel creating far less play than the current bushing system. The bushing also retains the new stainless steel guide plug.

The bushing keeps the front sight in the slide so no pin is necessary or needed (fitting the pin will damage the bushing threads.) DO NOT ADD A PIN.

The bushing will need to be removed before the barrel can be taken from the gun.

Ransom Rest testing at 50 yards with Fiocchi 125 JHP (A ZERO bullet) has proved group of less than 3” compared with a factory new gun at about 5.0”. At 25 yards the groups were around 1.2” a one-hole group.

This can be retrofitted by CZC to any CZ with a full width slide.

What’s new and very exciting is the CZC SHRT reset trigger system. People have been asking for a shorter faster reset without the trigger swinging all the way forward in SA mode, now we have it.

We have taken almost all of the forward movement out of the single action position with the trigger moving on average less than a 1/16 (0.0625”) before stopping. We have basically created a 1911 single action on a double action gun.

PLEASE NOTE: This cannot be fitted to a B style guns, it can only be fitted on non firing pin block models. (NON-B GUNS)

Also Features a fully adjustable rear sight requires no modification to the slide fits in the “SHADOW ONLY” rear sight cut.

The notch is .120” Wide and .100” Deep.

REQUIRES A 7.5mm FRONT SIGHT
ONLY FOR SHADOW REAR SIGHT CUTS CHECK THE PHOTO.

All of the parts are retrofittable on a customer existing pistol. The CZC Bushing and Plug and the “CZC SHORT Reset Trigger System” will be CZC fit only. The adjustable rear sight can be supplied as a part for customer fitting and will require a 7.5mm Front sight.

Supplied with:

(1) Bushing Wrench
(3) 18 round 9mm magazines

LINK to Removal of Accu Bushing