| | |
|
| |
| | |
|
|
CZ 75 SP01 Custom Shop
|
Ships In 2/3 Weeks
Item Number: 91028
Ships In 2/3 Weeks
|
Custom Version of SP01 CZ
-
Competition Rear Sight CZ
-
Fiber Optic Front Sight
-
CZ Custom SA DA Hammer & Main Spring
-
Tune Trigger Components (Reduces Single and Double action trigger pull)
-
Re profile and Polish Disconnector and associated surfaces.
-
Remove Firing Pin Block and adjust FPB Lifter
-
Slide Stop For Magazine release with Heavy Bullets
-
Polish underside of Disconnector rail and break breach face edge
-
CZ Coco Bolo grips.
-
Includes 2 Magazines
-
Reliability Check.
-
Zero Check with Winchester White Box Ammo
Not for sale to CA (CA Residents Please Call for Info: 480 969 1311)
FAQ on trigger Pull
The CZ custom hammer will give you a "full" trigger pull of about 2.5 to 3.5lbs but creep free.
The reason I say ?full? is that is what the trigger will need to activate fully. I.e. hanging a weight on the trigger.
If we could actually weight the break point of the sear less the trigger return spring.
The actual beak point of the sear hammer engagement is about 1.5/2.0Lbs the rest is the trigger return spring, since we normally don't let the trigger all the way forward for subsequent shot the sear break point matter more then overall trigger weight.
To lighten the trigger more it is necessary to lighten the trigger return spring, this can be done by careful bending, also replace the mainspring with something lighter a 13lb or 15lb mainspring, this depends on the type of ammo you are going to shoot? I shoot a 13Lb mainspring, having said that I load my own ammo so can choose the primer sensitivity.
The other thing that is necessary to achieve a better trigger is to remove the firing pin block from the slide this give a much crisper feeling to the release since at the point of release the lifter is not engaging another set of springs etc. I suggest this ONLY as a race modification. If the FPB is to be removed then we can significantly Shorten the trigger reset, which make an even bigger difference. We would require written notification to remove the firing pin block.
USPSA NOW REQUIRES THE FIRING PIN BLOCK TO BE LEFT INTACT FOR PRODUCTION DIVISION
FYI
The above work can be carried out on any and all standard SA / DA style CZ Pistols. We do work on Decoker Models the cost is slightly higher. If you have a question please feel free to ask further questions or email me for a quote for work to be done on your own CZ firearm. We can do almost anything to CZ Pistols ?The Impossible we do at once, Miracles take a little longer?
What I need from you is
1/ Sighed Copy of THE FFL where you wish the gun to be sent.
2 / Signed release to remove the firing pin block
This SIGNED copy can be EMAILED: angus@ghostholster.com
FAX:- 480-969-9687 Or POSTED to me at:
Ghost Products Inc
1008 South Center Street
Mesa AZ 85210
ALL FIREARMS MUST SHIP FEDEX, PLEASE CHOOSE THE FEDEX NEXT DAY OPTION WHEN CHECKING OUT |
Product Reviews
|
|
|