CZ SA/DA & SA ONLY Comp Hammer (Low)
0.234" Wide Hammer Will Work In Small or Large Slide Slot
The “Low” Hammer is designed to be used in conjunction with machined in style rear sights for example.
TRT Champion LPA CUT (TS) #30049
Heine Low Mount.
Heine Straight eight.
Novak type sights.
This hammer will give you the necessary clearance to insure the hammer does not hit the bottom of the rear sight blade.
As an added benefit the can also be used with the standard sights.
This design allows more clearance below the rear sight for manual de-cocking etc.
Important Note on Hammer Width.
Standard CZ 75 Slides have a slide hammer notch width of 0.28" using a hammer width of 0.234".
CZ 75 SP01 Shadow, Tactical Sport, and CZ 75 Shadow have a slide hammer notch width of 0.355" using a hammer width of 0.315"
CHECK YOUR SLIDE NOTCH WIDTH BEFORE ORDERING.
This is the CZ UB (CZECH) Hammer, we buy in MASS quantity so are able to maintain a reduced price, which we pass on too you our valued customers.
This hammer will fit most models DA / SA CZ Pistols.
Also used for SA only guns. When used with SA only guns, do NOT use the DA parts.
Greatly reduces sear creep, lightens and smooths the single action trigger.
Use in conjunction with light main spring (13lb) for smoother lighter DA trigger pull.
We suggest that the hammer be fitted by a competent gunsmith.
The safety or sear may need to be fitted after installation of the hammer.
Not Suitable for Omega Trigger System and not for Decocker Model Guns.