General

Filter
Set Descending Direction

18 items

Page
per page
  1. Can you supply your SP-01 shadow with 5", Similar to the guns shipped to Australia and Denmark? YEs Its possible we have the CZ Custom Match Barrels in Various lengths
  2. My safety goes on with the Pistol Hammer in Half Cock or Fully Down Engaging the Safety Push the safety up to the Safety-On position until the red warning dot is covered. The safety in this position blocks the trigger mechanism and slide, thus preventing the pulling of the trigger and operating the slide. Since the trigger mechanism has been specifically ...
  3. Does xxxxxx part fit my EAA / Tangfolgio pistol? So far we have ascertained that almost no parts interchange without substantial re profiling and fitting.EAA / Tangfolgio seem to have chosen to create there clone with completely different measurement on almost all parts
  4. Firing pin blocks on CZ Pistols As of this moment the only CZ pistols that are not fitted with firing pin blocks are:CZ 75 Sp01 ShadowCZ 85 CombatCZ Tactical SportsAll other have firing pin block fittedthe B designation in the nomenclature on the slideI.E. CZ75B indicates the presence of the firing pin block.
  5. Grip Thickness Chart Grips Frame NOMINAL WEIGHT AND SIZES
  6. How do I Adjust the Over travel Screw on CZ Pistols The over travel screw should not be set too fine.The TEST WITH NO BULLETS IN THE GUN.Pull the trigger all the way to the rear as if firing and hold tight at the back of the trigger guard.Rock the hammer back and forth and see and feel if the sear is hitting the hammer hooks...If there is any ...
  7. I am interested in buying a CZ 75 SP-01 Tactical in .40 S&W I was wondering if you guys do any custom work on this pistol? I am mostly interested in improving the trigger. Sure we can complete any custom work on new guns before we ship (assuming it is legal in your state I.E. California)This is a great way to improve you gun and save some money on shipping.
  8. I am looking for a part on your website, which I know was originally there. Did you stop selling this part? We always try to maintain correct stock control, but sometimes due to unforeseen circumstance the websites stock quantities may differ.Sometimes when we do not have a part, we find it necessary to switch the product off, so it cannot be purchased, we obviously try not to do this and prefer for ...
  9. I have a CZ 75 pistol with a creepy, hard and mushy trigger. Would the 85 trigger installed by you and tuned, take care of this otherwise superb pistol? No the 85 combat trigger will make no difference to the trigger pull on the gun, having a trigger job which includes the Comp hammer, fitted will take care of this
  10. I have a decocker style factory pistol, is there anyway to convert it to Single Action Only? Unfortunately it is not possible, if this was done the pistol would not have a manual safety so it would not be safe in the SA Only mode
Filter
Set Descending Direction

18 items

Page
per page