(480) 969-1311

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

CZ Gunsmith Tools

Set Ascending Direction


Items 1 to 10 of 21 total

  1. 1
  2. 2
  3. 3
  1. Front Sight Drill No 47

    Using the Drill to Fit a NEW front sight.
    Remove the roll pin using the appropriate 2.0mm Front sight Roll Pin Punch
    Tap the old front sight out (towards the muzzle) using an appropriate soft hammer or soft block

    Replace the new front sight into the dovetail and tap it toward the back of the gun until it seats in the rear of the dovetail cut. Make sure it goes all the way back.

    Using the correct Number 47 Drill, for making the hole in the new front sight. Front Sight Drill

    Drill through the roll pin hole (IMPORTANT) Drill from the left side of the gun to the right side, Drill cut clockwise and drilling from this direction will not cause the front sight to walk out as the drill starts to cut.

    Replace the front sight pin, New Front Sight Pin

    Please Visit the FAQ for Installation Photos.

    sku: 30308


    sku: 10513
  3. CZ Bench Block

    CZ Gunsmith Bench Block.

    sku: 30310
  4. CZ Front Sight Roll Pin Punch

    2mm Steel Front Sight Roll Pin Punch

    sku: 30302
  5. CZ Firing Pin Retainer Pin Punch

    CZ Firing Pin Retainer Pin Punch 3mm

    sku: 30301
  6. CZ Hammer Pin Starter Punch

    1/16 Steel Hammer Pin Starter Punch.

    sku: 30306
  7. CZ Rear Sight Pusher

    Easily move the fixed rear sight on your CZ Pistols.

    Works for all CZ 75 / 85 Pistols P07/P09 and CZ 97B Pistols.

    Pusher clamps to the slide for precision adjustment. No more need for hammer and vise to easily adjust you fixed read sight.

    This is a sight adjustment tool and was never designed for complete removal or insertion of rear sight.

    Sights should be tapped in until they have correctly settled in the dovetail and then the adjuster used to center or adjust. If the block was bigger the potential for putting the sight in incorrectly grows exponentially.

    sku: 30320
  8. CZ Steel Rear Sight Punch

    1/4 Steel Parallel Rear Sight Punch

    sku: 30305
  9. CZ Extractor, Hammer & Trigger Pin Punch

    2mm Parallel Punch

    sku: 30304
  10. CZ Brass Sight Punch

    Brass Large Size 3/8 Punch for Drifting in and out rear sights

    sku: 30300
Set Ascending Direction


Items 1 to 10 of 21 total

  1. 1
  2. 2
  3. 3