My safety goes on with the Pistol Hammer in Half Cock or Fully Down

Engaging the Safety

Push the safety up to the Safety-On position until the red warning dot is covered. The safety in this position blocks the trigger mechanism and slide, thus preventing the pulling of the trigger and operating the slide.

Since the trigger mechanism has been specifically adjusted, it is possible to move the safety onto the "SAFE" position even if the hammer is placed on the safety notch or leaned against the slide. In this case, however, it is not recommended to engage the safety because the trigger mechanism might be damaged when cocking the hammer by force.

Besides the method previously described it is possible to put the pistol into a safety mode and still be ready to fire immediately.